isometric title scale date dr dwg rev the information contained in this document is propr ietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 100dp1t1b1m7qeh 2:1 7/24/2012 ST121013 b rc 1 1 pc mounting 4 1 pos. 1 pos. 3 a 20677 new release 7/24/12 rc note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. rating: 5 amps @ 120vac or 28vdc 2 amps @ 250vac 6. electric life: 40,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 12. hardware to be shipped bulk: t100011 - lock washer (1) t100015 - lock ring (1) t100000 - hex nut (2) pos. 1 pos. 2 pos. 3 switch function none on on 2-3, 5-6 n/a 2-1, 5-4 2 1 3 circuit: dpdt e-switch marking on opposite side 4 5 6 3 12.70 [.500 in] 6 5 4 6 5.08 [.200 in] 12.70 [.500 in] n 1.85 [.073 in] typ. 10.41 [.410 in] 5.08 [.200 in] 2.92 [.115 in] ? 3.81 [.150 in] 4.83 [.190 in] epoxy seal 11.43 [.450 in] 1.22 [.048 in] .76 [.030 in] 12.70 [.500 in] 3.81 [.150 in] 10.17 [.400 in] 1.27 [.050 in] 4.83 [.190 in] .50 [.020 in] keyway 25.0 3.18 [.125 in] 8.40 [.331 in] 1/4-4-uns thread b 21574 8.40mm was 8.89mm 9/9/14 ebp b
|